Minimum seat height is the lowest the saddle goes. It decides whether you can put a foot down without leaving the saddle, and it is the number e-bike brands print least often. Two brands, Lectric and Ride1Up, publish it for their whole range. This page collects every figure they publish, eighteen models in all, and lists the brands that publish none.
What minimum seat height do you need?
About 1–2 inches less than your inseam if you want to touch the ground while seated, which is the rule in our Fit Guide. By that guide’s limits, a 5’0″ rider needs a minimum seat height of 26″ or lower, 5’2″ needs 28″, 5’4″ needs 30″ and 5’5″ needs 31″. No e-bike in this database reaches 26″ or 27″. The lowest published figure is 27.5″, on the Ride1Up Vorsa ST.
Published minimum seat heights
Click any column heading to sort. “Inseam to sit and touch down” is the published minimum seat height plus 1″, the gentler end of the Fit Guide rule. It is arithmetic, not a measurement.
Narrow screen? The table scrolls sideways — there are eight columns.
| Model | Min seat height | Max seat height | Standover | Stated rider height | Inseam to sit and touch down | Type | Price |
|---|---|---|---|---|---|---|---|
| Ride1Up Vorsa ST | 27.5″ (699 mm) | 38.9″ | 18.66″ | 5′0″–5′11″ | 28.5″ | 27.5″ full-size* | from $1,495* |
| Lectric XP4 Step-Thru | 29.5″ | 42″ | 19″ | 4′10″–6′3″ | 30.5″ | 20″ × 3″ folding | $999–$1,299 |
| Lectric XP4 Step-Over | 29.5″ | 42″ | 24″ | 4′10″–6′3″ | 30.5″ | 20″ × 3″ folding | $999–$1,299 |
| Lectric XP Trike2 | 30″ | 42″ | 13.5″ | 4′10″–6′2″ | 31″ | Folding tricycle | $1,499 |
| Ride1Up Portola 02 | 30.5″ (774 mm) | 39″ | 16.5″ | 4′10″–6′4″ | 31.5″ | 20″ × 3″ folding | $995* |
| Ride1Up Prodigy V2 ECO XR | 30.7″ (780 mm) | 38.2″ | 27.6″ | 5′5″–6′1″ | 31.7″ | 27.5″ full-size | $1,295 |
| Ride1Up Prodigy V2 ECO ST | 30.9″ (785 mm) | 38.2″ | 21.7″ | 5′0″–6′0″ | 31.9″ | 27.5″ full-size | $1,295 |
| Ride1Up Vorsa XR | 31.37″ (797 mm) | 40.7″ | 29.21″ | 5′5″–6′4″ | 32.4″ | 27.5″ full-size* | from $1,495* |
| Lectric XPress Lite | 31.5″ | 43.5″ | 24″ | 5′4″–6′4″ | 32.5″ | City | $1,099 |
| Lectric XP Lite 2.0 | 32″ | 42″ | 22″ | 4′8″–6′2″ | 33″ | 20″ × 2.5″ folding | $799 |
| Lectric XPedition | 32″ | 49″ | 21″ | 4′11″–6′5″ | 33″ | 20″ cargo | $1,399 |
| Lectric XPress2 | 33″ | 45″ | 18.5″ | 5′2″–6′3″ | 34″ | Cruiser | $1,399 |
| Lectric XPeak 2.0 Step-Thru | 33″ | 45″ | 19.5″ | 5′2″–6′3″ | 34″ | 26″ × 4″ fat | $1,499 |
| Ride1Up Roadster V3 Low-Step | 33.46″ (850 mm) | 42.13″ | 23.2″ | 5′2″–5′11″ | 34.5″ | 700c × 45 | $1,395 |
| Ride1Up Trailrush (Medium) | 33.9″ (860 mm) | 39.8″ | 31.5″ | 5′5″–5′10″ | 34.9″ | 29″ mountain | $2,095 |
| Lectric XPeak 2.0 High-Step | 34″ | 46″ | 29″ | 5′4″–6′5″ | 35″ | 26″ × 4″ fat | $1,499 |
| Ride1Up Roadster V3 (Medium) | 35.04″ (890 mm) | 44.09″ | 30.5″ | 5′5″–5′9″ | 36″ | 700c × 45 | $1,395 |
| Ride1Up CF Racer1 (Small) | 35.6″ (905 mm) | 39.1″ | 29.5″ | 5′3″–5′8″ | 36.6″ | 700c gravel | $2,295 |
Sources: Ride1Up Vorsa · Lectric XP4 Step-Thru · Lectric XP4 Step-Over · Lectric XP Trike2 · Ride1Up Portola 02 · Ride1Up Prodigy V2 ECO · Lectric XPress Lite · Lectric XP Lite 2.0 · Lectric XPedition · Lectric XPress2 · Lectric XPeak 2.0 Step-Thru · Ride1Up Roadster V3 · Ride1Up Trailrush · Lectric XPeak 2.0 High-Step · Ride1Up CF Racer1. Prices are list prices shown on October 15, 2026. *Vorsa comes in three builds with the same frame geometry: Lite ($1,495), Vorsa ($1,595) and FT with 4″ fat tires ($1,695). Portola 02 is $995 with the 10 Ah battery; the lighter Portola Lite starts at $895. XP4 prices are for the 500 and the 750 Long-Range; both brands run frequent discounts, so check before you buy.
Three things this table shows
1. The lowest saddle is on a full-size bike, not a folder
The Ride1Up Vorsa ST goes down to 27.5″. That is 2″ lower than any Lectric and 3″ lower than the Portola 02, a 20″ folder sold as the small-rider choice. Ride1Up states a 5′0″ minimum rider height for the ST frame and publishes a standover of 18.66″. Ride1Up uses the same ST geometry for all three Vorsa builds (Lite, standard and FT). Only the weight changes: 61, 65 and 72 lbs as Ride1Up lists it.
2. “Step-through” does not mean a lower saddle
The label tells you about the frame you swing a leg over, not about the seatpost. On the Lectric XP4, the step-thru and step-over frames share the same 29.5″ minimum seat height; only the standover changes (19″ against 24″; full comparison). On the Ride1Up Prodigy V2 ECO, the ST frame’s minimum seat height is 0.2″ higher than the XR’s. The Vorsa is the exception, where the ST frame does sit 3.9″ lower. If seat height is your problem, read the number, not the frame name. Our standover database covers the other measurement.
3. Stated rider heights run lower than the seat heights
Lectric rates the XP Lite 2.0 from 4′8″, the lowest stated minimum in our data, but its saddle bottoms out at 32″. By the Fit Guide rule that suits a 33″ inseam. A stated range tells you who can clear and ride the bike. It does not promise you can touch the ground while seated. We compared the two Lectrics in detail in XP Lite vs XP4: seat height.
Seated or standing at a stop? The Fit Guide rule assumes you want to stay on the saddle with a foot on the ground. Many riders instead slide forward off the saddle at every stop and stand over the frame. For them, standover matters more than seat height. Know which way you stop before you rule a bike out on this number alone.
Find your limit by height
| Your height | Fit Guide max min seat height | Bikes in this table that meet it |
|---|---|---|
| 5’0″ (152 cm) | 26″ | None |
| 5’1″ (155 cm) | 27″ | None |
| 5’2″ (157 cm) | 28″ | Vorsa ST |
| 5’3″ (160 cm) | 29″ | Vorsa ST |
| 5’4″ (163 cm) | 30″ | Vorsa ST, XP4 Step-Thru, XP4 Step-Over, XP Trike2 |
| 5’5″ (165 cm) | 31″ | All of the above, plus Portola 02, Prodigy V2 ECO XR, Prodigy V2 ECO ST |
Height-based limits are a starting point; inseam varies widely at any height. Measure your inseam and compare it with the “inseam to sit and touch down” column instead.
Brands that publish no minimum seat height
These bikes are often recommended to short riders. We read their full specification and geometry tables, including the collapsed sections, and found no minimum seat height:
| Model | Stated min rider height | What the brand does publish |
|---|---|---|
| Aventon Sinch 2.5 | 4’11” | Full geometry table A–N, standover 390 mm |
| Aventon Pace 4 Step-Through | 4’11” | Full geometry table A–N, standover 430 mm |
| Aventon Soltera 2.5 | 5’1″ (size S) | Full geometry table A–N, standover 29–31″ |
| Tenways CGO800S | 5’1″ | Frame geometry only, standover 430 mm |
| Vvolt Centauri II | Not published | No geometry or size data we could find |
Aventon’s tables list seat tube length and seat tube angle. Neither is the minimum seat height, and you cannot work it out from them without the seatpost and saddle dimensions.
If the lowest setting is still too high
Some parts can bring the saddle down a little. A thinner saddle or a shorter seatpost can help, and shorter cranks let you sit lower at the same leg extension. A frame can only go so low, though, and every part has to fit the bike: seatpost diameter, crank interface. Our fit-fix parts guide lists which sizes each model publishes.
Frequently asked questions
What is the lowest minimum seat height on an e-bike?
Of the eighteen models with a published figure that we have checked, the Ride1Up Vorsa ST is lowest at 27.5″ (699 mm), with a stated rider height of 5’0″–5’11”. Next come the Lectric XP4 Step-Thru and Step-Over at 29.5″. The Fit Guide limits for 5’0″ (26″) and 5’1″ (27″) are not met by any of them.
Which e-bike brands publish minimum seat height?
Of the five brands we track, Lectric and Ride1Up publish it for every current model we checked. Lectric calls it “Seat to Ground”; Ride1Up calls it “B – Minimum Seat Height”. Aventon publishes a full geometry table without it; we found no figure from Tenways or Vvolt either.
How low should my e-bike seat be?
To touch the ground while seated, the saddle should sit about 1–2 inches below your inseam, which is the rule in our Fit Guide. Your inseam is measured from the floor to your crotch, in the shoes you ride in. If you get off the saddle at stops and stand over the frame, standover height matters more than seat height.
Does a step-through frame have a lower seat height?
Not necessarily. The Lectric XP4 Step-Thru and Step-Over share the same 29.5″ minimum seat height. The Ride1Up Prodigy V2 ECO ST sits 0.2″ higher than the XR. Step-through frames lower the standover, not always the saddle.
Is minimum seat height the same as standover height?
No. Standover is the height of the frame where you straddle it; minimum seat height is how low the saddle can be set. The Lectric XP Trike2 has a 13.5″ standover but a 30″ minimum seat height. See our standover database for the other number.
How we compiled this database
We do not ride or measure these bikes. On October 15, 2026, we read each figure off the manufacturer’s current product page, opening collapsed size guides and spec sections, and linked the source above. The table includes every model from the two publishing brands with a stated minimum rider height of 5’5″ or less; taller-only frames (Trailrush Large, Roadster V3 Large, CF Racer1 Large) are left out. When a manufacturer changes a figure, we update the row and the date at the top of this page.
