News

Graphic: only two of five brands publish minimum seat height, standover is often in a collapsed table, and brands state weight four different ways with or without the batteryResources
How to Read an E-Bike Spec Sheet for Fit: Where Brands Hide Standover, Seat Height and Weight
035
Standover, minimum seat height and weight go by different
TONIMOTO
Comparison graphic: the Lectric XP4 Step-Thru has a 19 inch standover and the Step-Over 24 inches, while both share a 29.5 inch minimum seat height and the same 62 lb weight without batteryComparisons
Lectric XP4 Step-Thru vs Step-Over for Short Riders: Only the Standover Changes
042
We compared Lectric's published specs for both XP4
TONIMOTO
Comparison graphic: of the eight e-bikes rated for a 5 foot 0 rider, all eight clear a 23 inch standover, none publishes a minimum seat height at or below 26 inches (closest: Ride1Up Vorsa ST at 27.5), and one weighs 50 lbs or lessBest E-Bikes
Best E-Bikes for 5’0″ Riders: Eight Bikes Rated for Five Feet, Checked Against Three Fit Numbers
056
Eight e-bikes we track are rated for a 5'0" rider.
TONIMOTO
Graphic summarising which e-bike fit problems parts can fix for short riders: handlebar height and reach are adjustable with stems and bars, seat height only slightly with a saddle, and standover height not at allSetup & Comfort
Fit-Fix Parts for Short Riders: What Actually Lowers Reach and Seat Height on an E-Bike
093
Stem risers, short stems, swept-back bars, thin saddles
TONIMOTO
Comparison graphic: the Ride1Up Portola 02 publishes a 16.5 inch standover, a 30.5 inch minimum seat height and a 61 lb weightFit & Sizing
Ride1Up Portola 02 Geometry for Short Riders (5’0″–5’5″): Standover, Seat Height, Reach
087
Ride1Up now publishes a full geometry table for the
TONIMOTO
Comparison graphic: the Lectric XP Lite 2.0 has a 22 inch standover but its saddle bottoms out at 32 inches, while the XP4 has a 24 inch standover and a lower 29.5 inch minimum seat heightComparisons
Lectric XP Lite vs XP4: Why the Lower Frame Has the Higher Saddle
01.3k.
The XP Lite has the lower frame and the lower stated
TONIMOTO
Comparison graphic: the Ride1Up Roadster V3 Low-Step frame publishes a 23.2 inch standover and 33.46 inch minimum seat height, the standard Medium frame publishes 30.5 inches and 35.04 inchesFit & Sizing
Ride1Up Roadster V3 Geometry, Read for Short Riders (5’0″–5’5″)
0165
Ride1Up publishes a full geometry table for all three
TONIMOTO
Diagram showing where to measure brake lever reach: from the front face of the grip to the face of the lever blade, with the lever at restSetup & Comfort
Brake Lever Reach for Small Hands: The E-Bike Setup Guide
0124
If you can only reach your brake levers with your fingertips
TONIMOTO
Woman adjusting e-bike seat height for short rider fitSetup & Comfort
How to Adjust Your E-Bike for a Perfect Short Rider Fit (Step-by-Step)
0391
A step-by-step guide to adjusting seat height, handlebars
TONIMOTO
Lectric XP 3.0 vs Aventon Soltera.2 e-bike comparison for short ridersComparisons
Lectric XP4 500 vs Aventon Soltera 2.5: Which Fits Short Riders Better?
0208
A spec-by-spec comparison of two current e-bikes for
TONIMOTO